Data Logger for Solar Charge Controller

Accessories for Fangpusun Tarom and Fangpusun Power Tarom
(Tarom 235, Tarom 245, Tarom 440, Power Tarom 2070, Power Tarom2140, Power Tarom 4055, Power Tarom 4110, Power Tarom 4140 )
Fangpusun PA Tarcom
Data Logger
1. The Fangpusun PA Tarcom data logger is connected to the RJ45 Interface of the Fangpusun Tarom or Power Tarom charge controller, Or via the Fangpusun PA HS200.
2. The Data Logger is available in several different versions:
(1). As a simple RS232 interface to directly save adn read data on the
PC or Laptop (Fangpusun PA Tarcom 01),
(2). As a data logger with an integrated analogue modem (Fangpusun PA Tarcom RM),
(3). As a data logger with an optional telephone connection (Fangpusun PA Tarcom RMT),
(4). As a data logger with an integrated GSM modem for remote Monitoring (Fangpusun PA Tarcom GSM).
3. The Fangpusun PA Tarcom is delivered with its accompanying Software.
4. Characterisation of the operating performance
(1). System Voltage: 12V/24V
(2). Logger Capacity: 1 Mbit
(3). Own consumption: Less than 10mA/30mA
(4). Recorded values: Relative time, total charge current, battery current,
Solar module current, load current, SOC, battery
Voltage, system status, analog sensor
(5). System status information: Night, overload, load disconnect,
Overvoltage, low voltage, over
Temperature, no module
(6). DC Output side:
Battery voltage: 8V to 65V
(7). Safety output
Alarm output: For all recorded parameters programmable
(8). Fitting and construction
Interfaces: RS232, analog modem, GSM modem, ethernet
(9). Configurable analog auxiliary input: 0mV to 150mV
(10). Dimensions: 129*82*38mm
(11). Weight: 150g
5. Tarcom software
(1). Internet services for worldwide access
(2). Downloads data from the logger to a PC
(3). List of data sets can be exported to MS-EXCEL
(4). Graphic visualisation of data sets(values/time)
(5). Analyzes energy flows (Ah) within PV hybrid system
(6). Activation and selection of alarm types
(7). Configurates modem
(8). Sets telephone number to call
(9). Tells the data logger at what time it has to call